Upload files to "/"

esp32_canfd_logger.ino

@@ -0,0 +1,65 @@
+// ESP32-S3 CAN FD Logger with WiFi Real-time Display
+// Main entry point for Arduino IDE
+// Board: ESP32S3 Dev Module
+
+#include "config.h"
+#include "task_config.h"
+#include "can_handler.h"
+#include "sd_logger.h"
+#include "rtc_manager.h"
+#include "web_server.h"
+#include "dbc_parser.h"
+#include "signal_manager.h"
+#include "auto_trigger.h"
+#include "psram_buffer.h"
+#include "test_handler.h"
+
+void setup() {
+  Serial.begin(115200);
+  delay(1000);
+  
+  Serial.println("================================");
+  Serial.println("ESP32-S3 CAN FD Logger");
+  Serial.println("Version 2.0 - PSRAM Optimized");
+  Serial.println("================================");
+  
+  if (psramFound()) {
+    Serial.printf("PSRAM found: %d MB\n", ESP.getPsramSize() / (1024 * 1024));
+  } else {
+    Serial.println("WARNING: PSRAM not found!");
+  }
+  
+  if (!initPSRAMBuffers()) {
+    Serial.println("PSRAM buffer initialization failed!");
+  }
+  
+  initFreeRTOSResources();
+  initRTC();
+  initSDCard();
+  createLogDirectories();
+  initCAN();
+  initSignalManager();
+  initAutoTrigger();
+  initTestHandler();
+  createAllTasks();
+  
+  printMemoryStatus();
+  
+  Serial.println("System ready!");
+  Serial.printf("AP SSID: %s\n", WIFI_AP_SSID);
+}
+
+void loop() {
+  static uint32_t lastCheck = 0;
+  
+  if (millis() - lastCheck > 30000) {
+    lastCheck = millis();
+    Serial.printf("[Status] Heap: %d KB, PSRAM: %d KB, Buffer: %d/%d frames\n", 
+                  ESP.getFreeHeap() / 1024, 
+                  ESP.getFreePsram() / 1024,
+                  canFrameBuffer.available(),
+                  canFrameBuffer.capacity());
+  }
+  
+  vTaskDelay(pdMS_TO_TICKS(1000));
+}